Steam Generators
Whether you’re powering an industrial process or maintaining a sterile environment, Enerquip builds a steam generator to fit. Our thermal fluid steam generators (below, left) deliver efficient, cost-effective process steam without the complexity of a traditional boiler setup. For applications requiring the highest purity, our clean steam generators (below, right) produce sanitary-grade steam for pharmaceutical, food, and medical processes.
With both, you get Enerquip’s reliability, safety, and energy efficiency, custom-engineered to fit your operation. Request a quote.

Customizable Steam Generator Options
- Sizes: Up to 48″ diameter, or larger depending on weight.
- Style: U-tube, single-pass, or multi-pass configurations.
- Materials: Carbon steel, 304L SS, 316L SS, Duplex, AL6XN, Hastelloy, and more. Our sanitary equipment is manufactured
in our carbon-free facility in Medford, WI. - Types: ASME, TEMA Class B, C, or R, PED, CRN.
Clean Steam Generators for Sanitary Processes
For industries that require sanitary-grade steam, our vertical clean steam
generators deliver clean, controlled steam production.
- Designed for purity:Steam is generated on the tube side for easier cleaning and control. Pure water enters the bottom of the exchanger and is heated as it rises through the tubes, while hot oil, plant steam, or waste exhaust streams flow on the shell side. Fed with plant steam, the unit works as a steam-to-steam generator, converting plant steam into clean steam.
- Used in sanitary processes: Ideal for pharmaceutical, food, and medical sterilization and cleaning equipment. Contact us to review your alloy and finish requirements.
Industrial Thermal Fluid Steam Generators
A thermal fluid steam generator is the right choice for facilities that need steam but don’t want the capital cost of a large-scale boiler operation. Pair an Enerquip hot oil heater with an industrial steam generator and a High-Pressure Condensate Receiver (HPR), and overall system efficiency is unmatched. The faster start-up and shutdown also make it well suited to on-demand steam generation.
How Thermal Fluid Steam Generators and Hot Oil Heaters Work Together
Hot oil from the heater circulates through tubes inside the steam generator. Those tubes transfer heat to the water in the generator’s shell, producing steam. Unlike a fired boiler, the tubes in a steam generator never exceed the temperature of the hot oil flowing through them, which reduces the risk of overheating.
Maximize Energy Recovery with an HPR System
A process steam generator becomes more efficient and cost-effective when paired with a High-Pressure Condensate Return (HPR) system:
- It captures and recycles condensate, reducing heat loss and fuel consumption.
- Condensate stays above its atmospheric boiling point, so thermal energy isn’t wasted.
- Expect 15-35% efficiency gains, saving millions of BTUs annually.
Advantages of Thermal Fluid Steam Generators Over Boilers
- Often no boiler operator needed: Boilers often require a licensed operator on-site. Thermal fluid steam
generators operate with minimal oversight in most states, reducing labor costs. - Single fuel source: Steam comes from the heat already in your thermal fluid system rather than from a separate boiler, reducing fuel consumption and emissions with a single emissions source.
- Higher safety: They operate at lower pressures than boilers, reducing the risk of explosions and other high-pressure hazards.
- Improved efficiency: The closed-loop thermal fluid system gives better heat transfer and reduced energy losses.
- Precise temperature control: Consistent, accurate heating for applications where maintaining a specific temperature is critical.
- Compact design: Thermal fluid steam generators typically need less space than boilers, which helps in tight installations.
- Versatility: They can use a variety of heat sources, including hot thermal oil or plant steam.
- Faster start-up and shutdown: Quicker response to changes in heat demand.
Steam Generator Applications
- Industrial heating and power: Power generation, heating, and steam turbines.
- Manufacturing and processing: Sterilization, drying, and power generation across sectors.
- Medical, food, and sanitation: Cleaning, sterilization, and humidification in controlled environments.
- Oil and gas: Enhanced oil recovery and other energy-related processes.
- Waste management: Waste incineration and related processes.
- Textile production: Dyeing, drying, and fabric finishing.
- Infrastructure and storage: Heating buildings, facilities, and asphalt slurry in railcars or storage tanks.
Get More from Your Steam System
If you need an industrial or clean steam generator that’s reliable, efficient, and low maintenance, you’ve come to the right place. Enerquip’s steam generators serve a range of industrial and sanitary applications and help your facility run more efficiently, saving money in both the short and long term.
Ready to learn more? Contact us today, or read our steam generator FAQs.
Request a Quote >>
American Heating Company is now Enerquip Thermal Solutions.