Selecting Tube Sizing in a Shell and Tube Heat Exchanger

When designing a shell and tube heat exchanger, selecting the appropriate tubing sizes is crucial for optimal performance. Engineers and process managers must consider various factors, such as application requirements, pressure drop, and flow characteristics, to determine the most suitable tubing dimensions. In this article, we will delve into the intricacies of shell and tube heat exchanger tube sizing.

Standard Tubing Sizes and Their Applications

Shell and tube heat exchangers employ standardized tubing sizes to facilitate manufacturing and interchangeability. Some common tubing sizes and their typical applications include:

  • 3/8” (9.57 mm): Ideal for small-scale operations, including pilot projects, medical devices and precision cooling systems. Often used in pharmaceutical applications.
  • 1/2″ (12.7 mm): Also used in small-scale operations, including laboratory setups. Often used in industries like electronics, aerospace, and pharmaceuticals.
  • 3/4″ (19.05 mm): Widely used in small to medium-sized heat exchangers for various industries, such as chemical processing, food and beverage, and pharmaceuticals.
  • 1″ (25.4 mm): Suitable for medium to large-scale applications, including oil and gas, power generation, and desalination plants.
  • 1 1/4″ (31.75 mm): Commonly found in large-scale industrial applications, such as refineries, petrochemical plants, and power stations.
  • 1 1/2″ (38.1 mm): Employed in high-flow, low-pressure applications, such as cooling water systems and condensers.

Pressure

One of the primary factors in determining tube diameter is the pressure of the fluids flowing through the heat exchanger. The tube walls need to be thick enough to withstand the operating pressures without failure. Higher pressures generally require thicker tube walls which may then require larger tube diameters to maintain flow characteristics.  Typical tube wall thicknesses range from 16 gauge (0.065 inches) to 10 gauge (0.135 inches), with thicker walls used for higher pressure applications.

Fluid Flow

Another major factor in tube diameter selection is the flow rate and velocity of the fluids passing through the heat exchanger. Higher flow rates generally require larger tube diameters to maintain an acceptable pressure drop. If the tubes are too small, the fluid velocity will be too high, leading to excessive pressure drops, cavitation, erosion, and higher pumping costs. Conversely, if the tubes are too large, the fluid velocity will be too low, resulting in poor heat transfer performance and potential fouling issues.

The ideal fluid velocity in a shell and tube heat exchanger is typically 3-6 ft/s for low-viscosity liquids and 50-100 ft/s for gases. Maintaining these velocity ranges helps optimize heat transfer while avoiding excessive pressure drop. The tube diameter must be selected based on the expected flow rates of the hot and cold fluids, with higher flow rates likely requiring larger diameter tubes.

Application and Duty Cycle

The specific application and duty cycle of the heat exchanger also affect the optimal tube diameter. For example, a heat exchanger used in a continuous industrial process will have different requirements than one used intermittently in an HVAC system. Continuous processes may need to handle higher flow rates, requiring larger tube diameters.

The heat exchanger’s duty cycle – whether it operates 24/7 or just a few hours per day – can impact tube diameter selection. Heavier duty cycles may call for thicker tube walls and larger diameters to handle increased thermal and mechanical stresses. Other application-specific factors like corrosion, fouling, and vibration may also influence tube diameter choice. For instance, a heat exchanger handling a highly corrosive fluid may need thicker tube walls and, thus, larger diameters to ensure an adequate service life.

Thermal and Mechanical Considerations

Thermal and mechanical requirements also play a role in determining the optimal tube diameter. Smaller tube diameters generally result in higher heat transfer coefficients due to higher fluid velocities and more turbulence. However, very small tubes can lead to excessive pressure drops and fouling issues, requiring a balance between heat transfer performance and pressure drop.

Mechanically, tube diameter impacts the structural integrity and vibration characteristics of the heat exchanger. Larger diameter tubes are more resistant to vibration-induced fatigue failures, an important consideration for high-vibration applications. Additionally, tube diameter affects the overall weight and size of the heat exchanger, with larger diameter tubes resulting in physically larger units.

Optimizing Tube Diameter

As you can see, many interrelated factors determine the optimal tube diameter for a shell and tube heat exchanger. It’s a complex decision requiring careful analysis and trade-offs. Generally, the goal is to select the smallest tube diameter that can still meet pressure, flow, and application requirements while optimizing for heat transfer performance, structural integrity, and cost. This often involves an iterative design process where different tube diameter options are evaluated to find the best overall solution.

Turn to Enerquip to perform the vital thermal calculations required to optimize your heat exchange solution. Contact us or request a quote today.